The small, powerful RC data logger and telemetry sensor stores and transmits V / A / W / mAh / Wmin / rpm / ° C / single cells / height / vario
The UniLog 2 is the successor to our successful data logger UniLog. All known functions of the UniLog have been taken over and brought up to date with the latest technology. Numerous new functions have been added, so that practically nothing is left to be desired.
Telemetry via 2.4 GHz systems with a return channel is now an integral part of the UniLog 2 and fully integrated. In accordance with our philosophy of supporting as many systems as possible, the UniLog 2 also speaks the language of Jeti Duplex, Multiplex M-Link, Graupner HoTT, Futaba, JR DMSS, FrSky and Spektrum (via spectrum adapter).
The telemetry used in UniLog 2 only has to be specified once in the settings. This happens either with our PC program "UniLog 2 Tool" or with the UniDisplay. In the delivery state, HoTT GAM is selected.
Since an additional barometric (air pressure) height sensor with high resolution is integrated, a Vario is also implemented with the UniLog 2 in telemetry mode. Extensive alarms can also be programmed, which are reported via telemetry via the respective transmitter.
When operating with Multiplex M-Link, all data on the sensor bus is automatically logged by the UniLog 2 and also written to the memory card. You also get an MSB data logger.
A micro SD memory card serves as practically unlimited memory for the UniLog 2.
With a recording rate of up to 20 Hz and the micro SD memory card, recordings of almost any length with high detail resolution are possible. Data exchange with the PC for evaluation is also extremely easy: remove the memory card from the UniLog 2 and insert it into a USB port on the PC using the card reader provided. The measured values of the UniLog 2 are available as text files on the memory card. The data is then displayed and evaluated using the well-known LogView software or the GNU DataExplorer . Thanks to the internal real-time clock with battery, all measured values are always provided with the date and time.
The possibility of single cell voltage measurement is also new. A LiPo up to 6s can be connected directly to the UniLog 2 with its balancer plug, the individual voltages are measured and recorded and of course also transmitted via telemetry.
Via our UniDisplay, all measured values of the UniLog 2 can also be viewed directly live and the recorded data read from the memory card. Minimum and maximum values can be called up and displayed quickly from the saved recordings. All settings and alarms can of course also be conveniently programmed using the UniDisplay.
Regardless of whether it is a glider, aerobatic machine, helicopter, HLG or slow flyer, the UniLog 2 can be used in almost any area due to its light weight and compact size. Of course, the UniLog 2 is not only suitable for model flying. It can also be installed in RC boats, RC cars, etc.
With the UniLog 2 you acquire a universal RC data logger and telemetry sensor that is powerful in all respects and which uses the possibilities of modern electronics to be of great help to you as a little helper when dealing with your RC models.
And the UniLog 2 can:
Technical data and the complete range of functions can be found in the operating instructions.